GA738-II Weaving Loom

The loom is suitable chiefly to weave natural fiber (cotton, wool, flax), chemical fiber and blended fiber, particularly suitable for weaving heavy fabric. It is capable of weaving small jacquard fabrics; The machine can accommodate a harness frame of 20 shafts.

Rapier Loom Model GA738-II Specification
Nominal reed width: 2000-2200mm
Speed: Max. Operating speed 320 pick/min, max. Insertion rate 600m/min
Weft yarn count range: Cotton-5Ne-80Ne
Wool-8Nm-130Nm
Man-made fibers-1200dtex-75tex
Fabric weight: From 70 to 600g/sq. M.
Power: Main motor 3kw-6pole
Shedding: Lower positive mechanical dobby max. 20 shafts, pitch 12 or mechanical jacquard
Beat-up: ?Four-bar linkage with short connecting rod
Let-off: ?Mechanical positive and continuous warp let off, pick density from 4 to 73 picks/cm
Take-up: ?Mechanical positive and continuous warp cloth take-up. Pick density from 4-73 picks/cm. The max. Winding dia. Full rolling diameter is 500mm
Warp stop: Electrical warp stop device with 6 bars
Weft stop: Piezo-electronic weft monitor with high sensitivity
Weft selection: Electronic weft selection which is available in single or mixed or multicolor up to 6 colors
Weft feed: The loom is possible to be equipped with different types of weft accumulators
Selvedges: Leno selvedges are driven by the 1st and 2nd of heald frame
Electrical control: The most advance electrical control system, microprocessor units guarantees all the machine functions, supervising operation, collecting and storage and display of productivity data
Lubrication: The whole needful lubricating point is concentrative lubricated by means of a manual pump.