VoIP

VoIP Adaptors with FXS and Multiple SIP Accounts

Internet Telephony offers intrinsic benefits of cost and flexibility. At the same time legacy telephony infrastructure and habits cannot be replaced overnight. People desire the best of both worlds - lower cost of VoIP and convenience of using existing telephony products and methods.

Matrix SETU ATA Range of Products is designed to meet this requirement of converting VoIP network to traditional telephony interfaces and vice-versa. It handles all the complexities of VoIP technology internally and provides simple telephone interfaces to make and receive calls.

Let Matrix SETU ATA be your bridge to the new world of IP Telephony!

Matrix SETU ATA is a SIP based Analog Terminal Adaptor (ATA), it interfaces legacy telephone devices with IP-based networks. It is specially designed for SOHO users to offer them the advantages of low-tariff Internet Telephony for long distance calls, international calls and peer-to-peer calls. It can be used with any existing PBX providing users access to VoIP trunks. It can also be used in a stand-alone mode.

Matrix SETU ATA converts the voice traffic into data packets for transmission over the Internet. When a telephone number is dialed by a user, Matrix SETU ATA converts it into an IP call using the SIP protocol and initiates a call to the dialed number in any part of the globe. Using an appropriate VoIP service provider, long distance or inter-office call charges can be reduced significantly or eliminated through peer-to-peer calling on the IP network.

Making an outgoing call is as easy as from a normal telephone. Call progress tones like Dial Tone, Ring Back Tone and Busy Tone are fed to the caller as per the called number status. The FXS ports can make outgoing calls on a common or different SIP accounts. In addition, number based SIP account selection is provided to select the most economical SIP account for a given outgoing number.

An incoming call from a SIP account can be routed to any one or both FXS ports. All different CLIP protocols are supported so that the user can identify the caller before answering the call.

Once a call is established, features like Call Hold, Call Toggle, Call Transfer, Call Wait and Conference are supported to manage two calls from the same FXS port. Call forward in different conditions and Do Not Disturb is also provided.

The FXO port allows users to originate a call and terminate it at VoIP network. The routing logic used between FXO and VoIP helps the user to dial a destination PSTN number directly over VoIP network. Using FXO-VoIP routing logic two or more PBX can be networked to offer seamless connectivity between the PBXs

Matrix SETU ATA provides two Ethernet ports - one for WAN and the other for LAN. The user can connect his PC on the LAN port and browse the internet or check his emails while talking on VoIP calls.

Matrix SETU ATA can also be used with any PBX without changing its existing infrastructure. PBX users can make voice calls on IP to avail of the low-tariff of VoIP calls. The users can continue to make and receive calls without worrying on which network their calls are routed. Matrix SETU ATA is easy to install and operate. It can be configured using its built-in web pages served by the internal HTTP server. For more detail contact us.