Diamond sharpener stone

Product Description

Double Sided Diamond Stone T0831D is the most efficient abrasive for quickly sharpening and honing all edge tools. It offers a two-grit combination of coarse (360grit) and 600(grit) diamond sharpening stones. Coarse to transform a dull edge and fine for a razor sharp edge. The stone features a unique sharpening surface with an overlapping oval hole design that speeds sharpening by collecting and holding the metal chippings. This allows the sharpening surface to remain clean and clear. And the Plastic base with non-slip feet makes the sharpening easily and safely. It’s excellent for most kinds of knives and tools.

Product Feature

• Excellent Sharpening Performance
• Coarse & Fine Diamond Stones In One

• Molded Plastic Base with Non-Slip Feet for Safety

• Oval hole design to collect and hold metal chippings.

• Clear plastic cover protects the stone

• Ideal for most Kinds of Knives and Tools

Using Instruction

• Place the stone on a non-slip worktop and make certain that the surface is flat. Start by using the coarse grit of the stone.
• Move the blade back and forth over the stone at an angle of 10 - 30 ° by using gentle pressure. Start at the tip of the blade, continue to the middle, and finish at the end of the blade. After a while you will notice a small burr at the edge.
• Then move to the fine grit of the stone and repeat the process until sufficiently sharp.
• Please rinse the stone and clean off the grinding residues. Please also clean your knife with hot water.

Tips: 1. No oil is needed, sharpen dry or with water.

2. The 10 to 30 degrees depending on the application:10°for filet knives, 23°for kitchen or pocket knives, and 30°for cleavers

3. Use the entire surface of the stone when sharpening. This will ensure even wear of the stone over time.

Caution: Please be extremely cautious during the sharpening process to prevent any injuries.