Powder paint thickness gauge
group namePowder Coating Spare Parts
-
Min Order1 piece
brand nameHICOLO
modelCM8801FN
payment methodT/T, Western Union
-
update timeWed, 29 Jul 2015 15:55:42 GMT
Paramtents
Condition new
Substrate Aluminum, iron,steel
Warranty 1year
After-sales Service Provided Engineers available to service machinery overseas
Range 0~1250μm
Packging & Delivery
Min Order1 piece
Briefing
all-in-one machine, easy to operate.
Detailed
Fe type is applicable for nonmagnetic coatings on ferromagnetic substrates, e.g., zinc, chromium, copper, tin, or paint, plastics, enamel on iron or steel.
A symbol Fe is displayed on the screen.
NFe type is applicable for electrically non-conductive coatings on non-ferrous metals, e.g., paint, enamel, or plastics on aluminum, brass, or zinc and anodic coating on aluminum.
A symbol NFe is displayed on the screen.
2 in 1 type combines two probes in one meter and automatically identify the substrate materials.
Depending on the substrate, the symbol Fe or NFe is displayed on the screen.
Operation Method:
Hold the gauge and push the integrated probe vertically against the costing surface turns on the power automatically and starts the measurement.
Keep the probe on the coating and hold it steadily for a while till the buzzer sounds, take up the gauge and read the measurement.
Power is automatically cut off in 30 seconds after measurement.
Unit of measurement:
Press the button "μm/mil" to switch between micron (μm) and mil.(mil).
Flip display:
Press the button "Flip" to turn the display upside down for easy reading when measurement is taking on top, side or bottom surfaces.
Data storage:
Press the button "M" to read the final 10 measurements, "0" displays at lower corner of LCD screen, the final 10 measurements can be shown in sequence by pressing the button "+/-".
Calibrations:
a. Zero calibration: press "+" for 2 seconds, "000" displays on the screen, then take a normal measurement on uncoated metals, the reading is calibrated to zero automatically.
b. Calibration with standard films: after measuring the calibration film, press "M" for 2 seconds, then adjust the reading to the right value by pressing "+/-", press "M" again to finish the calibration.
c. Restore factory defaults: press "-" for 2 seconds, "0, 00, 000 …" displays in sequence on the screen, the factory defaults are restored. The function is useful when standard films are not available for calibration.
Substrate blocks and standard films:
Available with the package for calibration or self test.
AAA alkaline cell:
Replace the battery cell when "
" is shown on the screen, otherwise the reading may not be accurate.Specifications:
Range: 0~1250μm, 0~40 mils
Accuracy: ± (2μm +3%), ± (0.1 mils + 3%)
You need a product
You May Like
- Nearest port for product export
- Shanghai, Ningbo
- Delivery clauses under the trade mode
- FOB, CFR
- Acceptable payment methods
- T/T, PayPal, Westem Union
- Export mode
- Have the independent export and import right