1 - 200 piece
group nameRTV-2 silicone rubber for molds making
Min Order1 piece
brand nameHong Ye silicone rubber
modelE625 E630
payment methodL/C, T/T, Western Union
update timeWed, 20 Nov 2013 08:41:54 GMT
application silicone rubber for resin products
appearance liquid silicone rubber
hs code 39100000
color any
Min Order1 piece
Applications of Addition cure silicone rubber for resin products:
Addition cure silicone rubber for resin products mainly used for making stone mold, concrete statues mold, garden statue mold, statue mold, baluster mold, silicone candle molds,concrete statue molds, polyresin crafts, PU crafts, PU resin crafts, gypsum/plaster crafts, candles crafts, plastic toy, large statue Budda, indoor and out door decorations, concrete garden ornaments, cement ornaments, large-scale cement mold, animals and plants sculpture, figurines, sandstone crafts and so on.
Description of Addition cure silicone rubber for resin products:
a.low viscosity
b.easy operation
c.long shelf life over 12 months
d.good tear strength and low shrinkage
e.curing at room temperature within 2-4hours
f.high duplication times and no deformation
Picture show of Addition cure silicone rubber for resin products:
Datasheet of Addition cure silicone rubber for resin products:
Model | Color | Mixing ratio (%) | Pot life (mins) | Demould time ( hrs) | Hardness ( A0 ) | Tensile-strength | Tear-strength | Viscosity (mPas) | Shrinkage rate (%) | Elongation (%) |
E625# | white | 100 : 5 | 45-60 | 4-6 | 23-26 | 45kgf/cm2 | ≥ 29kgf/cm | 19500 | ≤0.3% | 450% |
E630# | white | 100 :5 | 30-40 | 3-5 | 29-31 | 49kgf/cm2 | ≥ 33kgf/cm | 27000 | ≤0.3% | 490% |
Operation guide of Addition cure silicone rubber for resin products:
1. Stir part A and part B with right mixing ratio (100:5) evenly. And get the mixture for vacuum-pumping. (If there is no vacuum machine, just mix less catalyst)
2. Clean your products and brush a layer of release agent (detergent or soap water) on your product.
3. Pour the mixture with correct mixing ratio into the model frame.
4.After about 3-5 hours, when the silicone get cured, take out the original mold, and there is th finished silicone mould.
Certification of Addition cure silicone rubber for resin products:
ISO9001: HK05/01358
SGS:GZ0606100461/CHEM
RoHS:BTRS091718751
Patent:ZL200520001597.8
Need any help on silicone rubber, please feel free to contact Ms Kitty:
Tel:86-755-89948294
Mob:86-18938867593
E-mail: hysh(at)szrl(dot)net
Skype:kity-467707861
You can also send me e-mail by scanning 2 Dimensional Bar Code below:
Package of Addition cure silicone rubber for resin products:
Manufacturer of Addition cure silicone rubber for resin products :
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.