SLR series continuous powder metallurgy mesh-belt high temperature sintering furnace

group namePowder metallurgy electric furnace series
Min Order1 piece
brand nameLary
modelSLB series
payment methodT/T
update timeFri, 08 Nov 2024 04:32:31 GMT

contact supplier

Paramtents

Product name sintering furnace
Application Powder Metallurgy
Preheating temp. 850℃
Sintering temp. 1150℃
Belt width 300-610 or Customized
Heating power 162-312KW or Customized
Material of Muffle Stainless steel or ceramic or Customized
Control chamber Customized
Temperature Uniformity ±5℃
Heating element SIC or Customized

Packging & Delivery

Min Order1 piece

Briefing

SLR series continuous powder metallurgy mesh-belt high temperature sintering furnace

Detailed

SLB seriestransformer curing oven

Keywords：sintering furnace、hightemperature electric furnace、sinteringfurnace for powder metallurgy、hightemperature vacuum furnace、ultrahigh temperature furnace、hightemperature electric furnace

Product attributes：

Productname: sintering furnace

Application: Powder Metallurgy

Preheating temp.: 850℃

Sintering temp.: 1150℃

Belt width: 300-610 or Customized

Heating power: 162-312KW or Customized

Material of Muffle: Stainless steelor ceramic or Customized

Control chamber: Customized

Temperature Uniformity:±5℃

Heating element: SIC or Customized

Pictures：

Features:

1)The complete equipment is composed of furnace body, mesh-belt transmissionsystem, temperature control system, and atmosphere control system.

2)The furnace body is composed of feeding section, pre-sintering section,sintering section, slow cooling section, water cooling and discharge section.

3)The pre-heating section adopts heating resisting metal muffle, which is dividedto three sectors to control temperature and heated by resistance wire or gas.

4)The sintering section adopts muffle made of silicon carbide combining withsilicon nitride (SiC+Si₃N₄), which is divided to threesectors to control temperature and heated by silicon carbide rod (SiC).

5)The mesh-belt transmission system is composed of imported SUS314high-temperature resisting mesh-belt and transmission devices.

6)The running speed of mesh-belt can be adjusted by frequency converter. There isa speed sensor with digital display to readout the speed of mesh-belt.

7)The temperature control system, which forms closed loop control system torealize automatic accurate temperature control, is composed of thermocouple,intelligent PID regulator with digital display and silicon controlledrectifier.

8)The gas flow meter displays the flow rate of protective atmosphere. The ratesof all kinds of atmosphere can be adjusted according to process requirement.There is an under pressure alarm system for atmosphere. In case of the pressureof atmosphere is under the setting value, the system gives out sound and lightalarms.

9)The temperature of cooling water is automatically controlled by the make andbreak of magnetic valve controlled by temperature controlling elements.

10)The electric control cabinet is completely sealed to guard against conductivedust. The heat exchanger or air conditioner in it can lower the workingtemperature of electrical components so as to raise the reliability ofcontrolling system.

Specification:

	SLR-300	SLR-350	SLR-450	SLR-610
Belt width （mm）	300	350	450	610
Preheating temp （℃）	850	850	850	850
Sintering temp （℃）	1150	1150	1150	1150
Heating power （KW）	162	198	252	312
Temperature Uniformity (℃)	±5	±5	±5	±5
Speed of belt (mm/min)	80	100	100	120
Output (kg/h)	100	120	150	300
Atmosphere Protect	Cracked Ammonia furnace、Nitrogen generator	Cracked Ammonia furnace、Nitrogen generator	Cracked Ammonia furnace、Nitrogen generator	Cracked Ammonia furnace、Nitrogen generator
Material of belt	SUS314	SUS314	SUS314	SUS314
Heating Element	Sic	Sic	Sic	Sic

Customerscan install an additional rapid cooling device on the original furnace so as tohardening the powder metallurgy parts. The cooling rate is over 2℃/S and thehardness HRC is over 35.

Application:

SLR series mesh-belt sintering furnace (also knownas mesh-belt powder metallurgy sintering furnace or powder metallurgycontinuous sintering furnace)is mainly used in the sintering of copper-basedand iron-based powder metallurgical product, composite material and bimetallicmaterial. also can be used in the brass soldering and bright heat-treatment ofcooling accessories of auto filter, refrigerator, air-conditioner, stainlesssteel parts, carbon steel parts, brass parts and red copper parts.

Factory:

Company:

Ningbo Lary Industry Technology Co., Ltd is ajoint venture with Portugal TECNIROLO Engenharia Industrial S.A. Lary is anengineering & manufacturing enterprise which inherits the concept ofproviding customers with best services in Europe for more than twenty years. TecniRolo - Portugal andLary Industry - China are a group of companies that work as a global solutionprovider for an international network over of 16 countries.