Sigmatek ETV1521 ETV1581 ETV1591 Touch Panel Protective Film
group nameSigmatek HMI
-
Min Order1 piece
brand nameVICPAS
modelEinbauterminal VARAN ETV 1521 ETV 1581 ETV 1591
payment methodWestern Union, MoneyGram, T/T, Paypal, PayPal, Credit Card
-
update timeSat, 09 Nov 2024 10:24:43 GMT
Paramtents
Touch screen tapes Resistance touch screen
Brand Sigmatek
Product Line ETV Series Control Panel
Size 15''
Parts Touch Screen Panel Glass Repair
Model Sigmatek ETV 1521 ETV 1581 ETV 1591
Warranty 365 Days
Packging & Delivery
Min Order1 piece
Briefing
Detailed
12-230-0851 SIGMATEK ETV 1521 ETV 1581 ETV 1591 Touch Screen Panel Glass Protective Film Repair
Order each part separately is available
The following clearance is required for the Sigmatek ETV1521 ETV1581 ETV1591 Protective Film Touch Digitizer Glass Terminal cover: Rear side, left and right 5 cm. Above and below 10 cm. A mounting position of 60° to 120° is also required. The ETV 1521 ETV 1581 ETV 1591 Touchscreen Panel Front Overlay terminal must be connected to earth through the mounting on control cabinet or over the ETV1521 ETV1581 ETV1591 Touch screen panel glass Film terminal provided. It is important to create a low-ohm earth connection, only then can error-free operation be guaranteed. The earth connection should have the maximum cross section and the largest electrical surface possible.
VICPAS supply SIGMATEK 12-230-0851 Einbauterminal VARAN ETV1521 ETV1581 ETV1591 touchscreen panel with protective film overlay, all of them are brand new with 365 days VICPAS warranty. The ETV1521 ETV1581 ETV1591 Control Panel with EDGDE Technology combines control, operation and visualization in a single unit. Local as well as decentralized I/O systems can be connected over the VARAN bus and therefore not bound to a specific topology when constructing your system. The available interface connections can be programmed completely from the application.
Specifications:
The table below describes the parameters of the Sigmatek 12-230-0851 VARAN ETV1521 ETV1581 ETV1591 Front Overlay Touchscreen Panel.
| Part Number : | ETV1521 ETV1581 ETV1591 |
| Product Line: | Sigmatek VARAN |
| Screen diagonal | 15 in |
| Warranty: | 365 Days Warranty |
| Input Power | 24 VDC |
| Display Type: | TFT color |
| Mounting position: | Vertical |
| Input Type: | Touchscreen |
| Serial interface Type: | RS232 |
| Storage | -20 to 70°C |
Related Sigmatek Panel Part No. :
| Sigmatek VARAN | Description | Inventory status |
| ETV 1211 | Sigmatek Einbauterminal VARAN Touch Screen Protective Film Repair | In Stock |
| ETV 1221 | Einbauterminal VARAN Sigmatek Touch Panel Protective Film Replacement | Available Now |
| ETV 1251 | Sigmatek Einbauterminal VARAN Touchscreen Protective Film Repair | In Stock |
| ETV 1521 | Einbauterminal VARAN Sigmatek HMI Touch Screen Glass Protective Film | Available Now |
| ETV 1581 | Sigmatek Einbauterminal VARAN Touch Screen Panel Front Overlay Repair | In Stock |
| ETV 1591 | Sigmatek Einbauterminal VARAN Front Overlay Touch Membrane | In Stock |
| ETV 1921 | Sigmatek Einbauterminal VARAN HMI Touch Glass Front Overlay Repair | In Stock |
| ETV 1941 | Sigmatek Einbauterminal VARAN Touch Digitizer Glass Overlay Repair | Available Now |
| ETV 1961-K | Sigmatek Einbauterminal VARAN HMI Panel Glass Protective Film | Available Now |
| ETV 1991 | Einbauterminal VARAN Touch Screen Monitor Front Overlay Replacement | In Stock |
| ETV 1991-K | Sigmatek Einbauterminal VARAN MMI Touch Screen Front Overlay | In Stock |
| ETV 1992-K | Sigmatek Einbauterminal VARAN HMI Touch Screen Protective Film | In Stock |
| SIGMATEK HMI | Description | Inventory status |
SIGMATEK Control Panel Manuals PDF Download:
FAQ:
Question:How to exchange the Sigmatek ETV 1521 ETV 1581 ETV 1591 Battery?
Answer:
1. Disconnect the power to the ETV.
2. Open the locking screws on the back f the terminal with a PH-1 screwdriver:
3. Lift rear panel of the terminal:
For HW version 1.x:
4. Using the strap, remove the battery the holder (see arrow).
5. Insert the new battery with the correct polarity and close the terminal.
(+ Pole toward the backside)
From HW version 2.x:
4. Using the strap, remove the battery from the holder (see arrow).
5. Place the new battery in the holder with the correct polarity (+ Pole toward the frontside) and replace the cover.
Question:What is the price of SIGMATEK ETV 1521 ETV 1581 ETV 1591 Front Overlay Touch Screen Monitor?
Answer: Submit a quote request, send us an email for our best price.
Common misspellings: ：
ETV151
TV1521
ET1V581
TEVl581
ETV11591
ETV15991
You need a product
You May Like
- Nearest port for product export
- Guangzhou, Hongknog, Shenzhen, Taiwan
- Delivery clauses under the trade mode
- FOB, CFR, CIF, EXW, FAS, CIP, FCA, CPT, DEQ, DDP, DDU, Express Delivery, DAF, DES
- Acceptable payment methods
- T/T, L/C, D/P D/A, MoneyGram, Credit Card, PayPal, Westem Union, Cash, Escrow