6FC5203-0AF10-2AA1 Siemens SINUMERIK OP010FS Keypad Membrane

Operator Panel of 6FC5203-0AF10-2AA1 Terminal Keypad Shell Cover
OP010FS 6FC52030AF102AA1 is used for Yaskawa Siemens CNC Series. Beside there are two types of the keyboard for OP010FS,i.e. QWERTY type and ABCD type, concerning arrangement and illustration of each key. For differences between these keyboards, please refer to Section 8.1 "Comparison table for keys".

Hot Keys of 6FC5203-0AF10-2AA1 Housing Keypad Membrane
• By pressing this key of 6FC5 203-0AF10-2AA1, the last opened screen in Start-up Operating Area can be displayed.
• By pressing this key, the last opened screen in Machine Operating Area can be displayed.

Reset Key of 6FC52030AF102AA1 Membrane Keyboard
This key is on ABCD type keyboard.
When you press the "Reset" key of 6FC5 203-0AF10-2AA1 Membrane Keypad Switch HMI Case:
• Processing of the current parts program is aborted
• Signals from the monitoring function of 6FC52030AF102AA1 are cleared (except for alarms signaling POWER ON, NC Start and Acknowledge alarm)
• The channel is switched to the "Reset" state,i.e.
-The NC control remains synchronized with the machine
-The control of 6FC5203-0AF10-2AA1 is in the initial state and ready for another program run. (See also /FB/, K1, Description of Functions Mode Group, Channel, Program Operation Mode)
Reset key of 6FC5 203-0AF10-2AA1 Plastic Cover Operator Keyboard will work only, if machine manufacturer has implemented the function internally via the PLC interface.