FT-AS00-5.7A-083F Touch Membrane Repair
group nameHMI Touch Screen Panel
-
Min Order1 piece
brand nameVICPAS
modelFT-AS00-5.7A-083F
payment methodWestern Union, MoneyGram, T/T, Paypal, PayPal, T/T ,Credit Card, Western Union
-
update timeTue, 05 Nov 2024 02:27:05 GMT
Paramtents
Warranty 365 Days
Shipping 2-4 workdays
Supply Parts Touch Screen Panel
Display Size 5.7 inches
Packging & Delivery
Min Order1 piece
Briefing
Detailed
FT-AS00-5.7A-083F HMI Panel Screen Replacement
Instruction for protective sheet
The Protective Sheet of FT-AS00-5.7A-083F Touch Screen Glass is replaceable, transparent sheet to protect a display. With the protective sheet covered on the display, you can operate touch switches.
Adjusting the FT-AS00-5.7A-083F Touch Panel
A gap may be caused in the operation accuracy of the touch panel by the secular distortion, etc.
Readjust the touch panel when there is a gap in the operation of the touch panel.
1. Wipe any dirt off the display using a soft cloth slightly dampened with neutral detergent or alcoholic solvent.
2. Remove the back sheet of the protective sheet.
3. The tab of the protective sheet should be positioned at lower left. Align the right side of the protective sheet with that of the FT-AS00-5.7A-083F Touch Digitizer Glass, then apply the protective sheet onto the display. Care should be taken to avoid ingress of air.
4. On the top of protective sheet, a thin cover sheet is applied to prevent the protective sheet from being damaged during transportation. Remove it before using FT-AS00-5.7A-083F HMI Touch Glass.
When a protective sheet gets dirty or damaged, replace the protective sheet with a new one. When replacing the sheet, remove the used adhesives completely. The Protective Sheet has no protection effect against chemicals. FT-AS00-5.7A-083F Touch Membrane has used a special material to filter out UV rays, however no warranty is given as to be installed in direct sunlight of outside.
Specifications:
The table below describes the parameters of the FT-AS00-5.7A-083F Touch Screen Tablet HMI.
| Storage Temperature: | -20 ~ 70°C |
| Model Number: | FT-AS00-5.7A-083F |
| Environment: | No Corrosive Gases |
| Screen Type: | Analog Resistive Film |
| Operating Temperature: | -20 ~ 60°C |
| Display Size: | 5.7" |
| Operating Humidity: | 10 to 90% RH |
| Warranty: | 1-Year Warranty |
| Display Type: | 256 Color LCD |
| Storage Humidity: | 20 to 85% RH |
IDEC Manuals PDF Download:
FAQ:
Question: How do I calibrate the touch screen on the FT-AS00-5.7A-083F HMI?
Answer: To calibrate the touch panel of FT-AS00-5.7A-083F, go to the calibration settings in the HMI menu. Follow the on-screen instructions to touch specific calibration points accurately. This process ensures accurate touch input across the screen.
Question: What are the screen types of FT-AS00-5.7A-083F Terminal?
Answer: The screen types of FT-AS00-5.7A-083F Machine are base screen, popup screen and system screen.
Question: How can I create and modify screens on the FT-AS00-5.7A-083F HMI?
Answer: FT-AS00-5.7A-083F HMI usually comes with dedicated software for screen development. Install the software on your computer, and then use it to design and customize screens with elements like buttons, images, text, and data display. The software often offers intuitive drag-and-drop interfaces for easy screen creation and modification.
Common misspellings:
T-AS00-5.7A-083F
FT-A00-5.7A-083F
FT-AS00-57A-083F
FT-AS00-5.7A-0083F
FT-AS00-5.7A0-83F
You need a product
You May Like
- Nearest port for product export
- Guangzhou, Hongknog, Shenzhen, Taiwan
- Delivery clauses under the trade mode
- FOB, CFR, CIF, EXW, FAS, CIP, FCA, CPT, DEQ, DDP, DDU, Express Delivery, DAF, DES
- Acceptable payment methods
- T/T, L/C, D/P D/A, MoneyGram, Credit Card, PayPal, Westem Union, Cash, Escrow