Three Zones Thermal Shock Test Chamber
group nameReliable Test Chamber
-
Min Order1 piece
brand nameHUDA Test Machine Manufacturer
modelHUD-E703 Thermal Shock Test Chamber
payment methodL/C, D/A, D/P, T/T, Paypal
-
update timeMon, 13 Dec 2021 09:10:59 GMT
Paramtents
Internal material SUS#304 stainless steel
Temperature range -40 to +150℃(can be customized)
Test method Pneumatic operated, two / three chambers
Pre-heat temp.range Ambient to +170℃, ≤35min
Pre-cool temp.range Ambient to -60℃, ≤60min
Temperature deviation ±3℃
Packging & Delivery
Min Order1 piece
Briefing
Detailed
MTL, IEC, JIS, GJB...
Item | Specification | ||||
Test method | Pneumatic operated, two / three chambers | ||||
Internal dimension | 350*400*350 mm (50L) | 500*450*450 mm (100L) | 550*450*550 mm (150L) | 650*450*670 mm (200L) | 800*450*820 mm (300L) |
External dimension | 1230x1830 x1270mm | 1380x1980 x1370mm | 1420x2000 x1400mm | 1530x1980 x1590mm | 1680x1980 x1735mm |
Pre-heat temp.range | Ambient to +170℃, ≤35min | ||||
Pre-cool temp.range | Ambient to -60℃, ≤60min | ||||
Temperature range | -40 to +150℃(can be customized) | ||||
Temperature deviation | 3~5℃ | ||||
Lifting switch time | ≤10 seconds | ||||
Test duration | >30mins in high temperature chamber / low temperature chamber | ||||
Test hole for cable routing | Diameter 50mm on the left of chamber attach a silicone plug | ||||
External chamber material | High quality electrolytic steel plate spray with powder, antirust | ||||
Internal material | |||||
Thermal insulation material | High quality superfine glass fiber | ||||
Refrigerant | R404A / R23 | ||||
Cooling method | Water cooling | ||||
Power supply | Three phase, 380V, 50Hz | ||||
High temperature chamber:
1, Including three parts: heater, draught fan and air duct valve
2, Draught fan cyclically stirs hot air through heater
3, The basket with testing product drive to high temperature range when doing high temperature impact test.
Low temperature chamber:
1, Including four parts: evaporator, energy storage piece, draught fan and air duct valve
2, Draught fan cyclically stirs cold air through evaporator and energy storage piece.
3, The basket with testing product drive to low temperature range when doing low temperature impact test.
Drive device:
Pneumatic cylinder: drive basket with testing product to high and low temperature chamber
Air compressor: Provide the compressed air for driving pneumatic door (supplied by buyer)
Refrigerating device:
Cooling system: complex overlapping efficient cryogenic loop system
Compressor: Bock compressor
Refrigerant: environmental protection refrigerant R23/R404A
Condensation: Stainless steel welded plate heat exchanger
Controller:
Operate interface: PLC controller, touch screen
Program memory capacity: 100 groups
Setting range: Time: 1 minute ~ 99 hour 59 minute, cycles: 1~ 9999cycles
Resolution: temperature: 0.01 ℃
Input: T thermocouple
Control method: PID auto calculation control
Additional functions:
Timer, over temperature and power failure protection, alarm, record test curve, emergency stop, display test time
Standard configuration: indication lamp of test chamber, time meter, test hole for wire routing, 6pcs castor, 4pcs adjust wheel.
Safety device:
Power overload protection
Leakage protection
Control circuit overload protection
Short-circuit protection
Compressor overload protection
Ground protection
Over temperature protection
Audible and visual alarm
You need a product
You May Like
6YRS haiyouda
- Nearest port for product export
- ShenZhen, HK
- Delivery clauses under the trade mode
- FOB, CFR, CIF, EXW, FAS, CIP, FCA, CPT, DEQ, DDP, DDU, Express Delivery, DAF, DES
- Acceptable payment methods
- T/T, L/C, D/P D/A, Cash