Sinbosen D4-2000 2 ohm stable 4400 watts 4 channels digital 1u digital power amplifier

group name2 Ohms Stable Amplifier
Min Order1 piece
brand nameSinbosen| Audio sound system manufacturer
modelD4-2000
payment methodWestern Union, T/T, Paypal
update timeFri, 08 Nov 2024 16:34:03 GMT

contact supplier

Paramtents

2Ω Output power 4CHx4760W
4Ω Output power 4CHx3400W
8Ω Output power 4CHx2000W
8Ω Bridge power 6800Wx2CH
4Ω Bridge power 9520Wx2CH
Voltage 90V-270V
Special service OEM service offered
Damping coefficient 5000
Minimum load impedance Stereo 2Ω Stable Amplifier
Gross weight 15kg
Amplifier Type Professional Digital Power Amplifier
Class Class D Power Amplifier
Channels 4 Channels Power Amplifier
For Line Array Speaker

Packging & Delivery

Weight14.00kg / piece
Min Order1 piece

Briefing

4 channels class d 1u digital amplifier D4-2000 professional power amplifier.
2 ohms stable amplifier for line array speaker.

Detailed

D SERIES HIGH POWER DIGITAL AMPLIFIER (DSP can be added)
Model		D2-3000	D2-3500	D2-4200	D4-2000	D4-3000
EIAJ Test Standard,1 kHz, 1% THD	8Ω/Stereo	2 x 3000W	2 x 3500W	2 x 4200W	4 x 2000W	4 x 3000W
	4Ω/Stereo	2 x 5000W	2 x 6300W	2 x 7800W	4 x 3400W	4 x 5000W
	2Ω/Stereo	2 x 7140W	2 x 7400W	2 x 8500W	4 x 4760W	4 x 6500W
	8Ω/Bridge	1 x 10200W	1 x 12500W	1 x 15600W	2 x 6800W	2 x 10000W
	4Ω/Bridge	1 x 14280W	1 x 14800W	1 x 17000W	2 x 9520W	2 x 13000W
Alternating Current Power Supply
Power		PFC Power
Rated power demand		100-240V±10%, 50/60Hz
Operation voltage		90V-270V
Power correction factor cos(φ)		>0.95 @ >500W
Standby		47W and 0.8A
Gain,Sensitivity		32dB,35dB,38dB,41dB
Maximum Output Voltage/Current		185V/85A (370V in the BRIDGE MODE)
Power Comsumption		230V (115V in the BRIDGE MODE)
Temperature
Environment temperature		0°-45C / 32′-113*F
Cooling system		Tunnel through cooing system
Performance
Frequency Response		20Hz - 20kHz (1W@8Ω,+05 dB)
Signal-to-Noise Ratio		>110 dBA (20 Hz- 20 kHz A weighted)
Crosstalk		>66 dB @ 1 kHz
Input Impedance		10 kΩ balanced
Total Harmonic Distortion(THD)		<0.5% from 1 W to full power (Typitcal value<0.05%)
Intermodulation Distortion(IMD)		<0.5% from 1 W to full power (Typical value< 0.05%)
Damping Factor (8 ohms)		>5000 @ 20-200 Hz
Slew Rate		50V/μs @ 8Ω
Front Panel
Indicator LED/per channel		One PCS Green LED: the input signal of XLR ≥ -40dB; Four pieces Green LED： display the output signal(-20dB,-10dB,-5dB,-3dB)of SPEAKON 1 piece dual LED(Yellow and Red): Protective state/Clip stste/Over heat/Over load
Power Switch		Press "I"-on; Press "O"-off.
Dust-proof		Two pieces dust-proof cotton, it can take off to clean from the bottom of front pannel
Application
Signal in-connection		4 Channel: One balanced XLR(with lock)female per channel; 2 Channel One balanced XLR(with lock)female and one balanced XLR male per channel.


Signal out-connection		One SPEAKON per channel connect to loudspeakers
Power cord		Fited to the device, and the CSA(cross sectional area)of the cord is 3 x 2.5mm², and the card is 1.5 meters long.

Multiple-Functions Switch		Two Sensitivity Switches. One Mode Switch and one Clip Switch.
Structure(The size and weight depend on different series and shipping demand )
Dimensions		482 x 44 x 380mm³/482 x 44 x 470 mm³
Net weight		10Kg/12kg
Packing size		580 x 580 x 119mm³/615 x 615 x 119 mm³
Shipping weight		12Kg/14Kg

Sinbosen D4-2000 Ampliifer

PROFESSIONAL POWER AMPLIFIER

1 Performance overview

a,High efficiency and energy saving, operation cost is low,

b,Compact and light weight,structure is firm.

c,Comply with the safety and EMC standards.

d,90~260VAC / 50~60HZ Wide range power supply.

e,First-class quality, thanks for the components from international high-end manufacturers.

f,Temperature control fan for quiet operation.

g,Modular design and maintenance is convenient.

h,Very suitable for mobile show.

i, Reasonable design makes you feel relaxed in the process of using.

2 Environmental protection, energy saving, cost saving

Advantages of high efficiency:

* Low working temperature, rlability will be improved obviously.

* The size and weight are only 1/3 of tradition amplifier.

" The cost for transportation, handling, installation will reduce obviously.

* Saving energy, reducing operating costs

* Environmental protection

3. Cooling instructions: Good heat dissipation /High quality fans

The cooling mode of the equipment is as follows: the cold air is sucked through the ventilation hole of the front panel, and the heat is taken out from the rear panel.

2 ohm stable amplifier

2 ohm stable amp

best 2 ohm stable amp

high power amplifier 2 ohm stable

2 ohm stable 2 channel amp