Best Catalytic Converter Cleaner Engine Carbon Cleaning Machine With DC 12V

Best Catalytic Converter Cleaner Engine Carbon Cleaning Machine With DC 12V

The influence of engine carbon:

The experiments show that the additive can cause sediment in the engine, especially the intake valve, and it is not only difficult to eliminate the sediment at this time, but also will take lots of money and the time. In addition, the function of additive can only maintain a very short validity period, but also may have other effects on the engine. For example, it may cause fuel gelation or waxing, fuel pump wear and tear aggravate, the running temperature rising of engine, increasing the amount of pollutants dissolved in the tank, and so on. The other methods of engine carbon removal, such as dripping, spray and disassembly, are either localized or time consuming(it takes one to two days to dismantle the engine, which still cannot meet the economical need. TD-501 engine carbon cleaning machine can help to solve these problems, which can clean five parts of engines.

Product specification:

Characteristics:

1. Prolong the engine’s lifetime after cleaning carbon deposits thoroughly.

2. The endoscope built-in can make the carbon cleaning effectiveness more visible.

3. Small and exquisite design with light weight for more convenient operation

4. It can clean carbon for five engine system parts: Three way catalytic converter, combustion chamber, fuel system, spark plug and intake valve.

5. This machine can do three way catalytic converter carbon cleaning with water based or oil based, which is the first innovation in China.

Product Introduction:

Compared to the HHO carbon cleaner, TD-501 can remove the carbon deposit much completely because of the cleaning agent. The special cleaning agent for this machine is effective but with the chemicals. And during the cleaning process, it needs to dismantle some parts of engines, especially the pipeline, but it can clean the engine thoroughly. The dirt can be exhausted from the exhaust pipe by stepping the gas. After carbon removal ,20% engine power is increased, 70% pollution is reduced, the engine noise is decreased, oil consumption is reduced. 

Working principle:

TD-501 is a machine should use the special cleaning agent adjusting to the engine part, which means that it works as a medium between the cleaning agent and the engine. 95% of cleaning agent will be sent into the engine part through the special pipeline of engine carbon cleaning machine, and then burn with the carbon deposit in the engine. Finally they will be consumed and become the gases exhaust from the pipe. Therefore, when finishing the carbon cleaning, the user should step on the gas to let the dirt outlet. So we can see the exhaust become white or black while step on the gas or some carbon deposit.

The cleaning methods of Aqueous ternary

1. Check the engine and ternary catalytic converters for malfunction;

2. Drive the car to a sloping place or top the front for better discharge of water during construction;

3. Remove the pre-oxygen sensor and unplug all the other oxygen sensors (if there are 2 or 4 oxygen sensors, remove the whole plugs)

4. Add the ternary catalytic cleaning agent and water to the washing machine according to the prescribed ratio (1 bottle of cleaning agent to 10 L water). The dirty one can be increased the concentration properly.

5. Connect the nozzle to the oxygen sensor, start the engine, keep running at the idle speed. Then turn on the power switch of the equipment, inject the cleaning liquid into the car and soak for 5 minutes.

6. Then the ternary catalytic reductant and water are added to the cleaning machine according to the prescribed ratio (1 bottle of cleaning agent to 10 L water), the power switch of the equipment is turned on and the cleaning liquid is injected into the car.

7. Step on the throttle and drain the fluid out of the exhaust pipe until the exhaust pipe runs out of water.

8. Restore the line, shut off the engine, and the cleaning is over.

9. Notice:

a. Prevent water from pouring back. Some models of oxygen sensors or three-way catalytic converters are at the same level with the engine, or higher than the engine, please do not use this method of cleaning, recommended other cleaning methods.

b. Old cars are not recommended for cleaning. Because the car is too old, many parts are aging and can be damaged at touch, such as oxygen sensors and ternary catalytic converters. Ternary catalytic converters close to the failure period or are not recommended cleaning, we must be clear to car owners in advance of the risk.

c. The turbocharged car can not speed up when cleaning, can only idle, after cleaning, the water has been drained almost can slowly increase the throttle, let the water continue to drain out, but can not accelerate quickly.

d. Make sure the exhaust pipe is completely drained.

e. All operation should wear acid-proof gloves, do not let the skin and cleaning liquid contact. Immediately rinse or consult a doctor with plenty of water as soon as the eye or skin gradually enters.

Engine Carbon Cleaner FAQ:

1. What is the working principle of TD-501?

Our cleaning agent is matched with the machine, and the organic solvent is mixed with the carbon in the car to achieve the effect of removing carbon from the car.

2. What effect can the car achieve after cleaning with TD-501?

After cleaning, the vehicle's power is improved, the idle speed is stable, the start is smooth, the fuel consumption is reduced, the exhaust emissions are more environmentally friendly, and the performance is restored as new.

3. When do I need to carbon clean my car?

We recommend servicing your vehicle every 15,000km or 6 months, whichever come first.

4. Can it use for diesel vehicles?

No, it can only clean the petrol cars.

5. What’s the function of the endoscope?

It can help to see the effect in the engine part, which is good for marketing.

1. How can I get the cleaning agent suitable for the machine?

You can purchase from our company and you also can get it from your local market if there is not convenient for importing such goods.