BFE 95% Melt Blown Non-Woven Fabric for Face Mask Filter
group nameMelt-Blown Non Woven Fabric
-
Min Order2000 kilogram
brand nameTAIMEI Tarpaulin Shade Fabric Manufacturer
modelNWF-BFE95
payment methodT/T, L/C, D/P D/A
-
update timeFri, 08 Nov 2024 03:09:28 GMT
Paramtents
Material Polypropylene
Color White
Application Face Mask, Disposal Face Mask
Weight 20 to 60gsm
BFE 95
Roll Width 175mm/195mm/250mm/260mm
Packging & Delivery
Min Order2000 kilogram
Briefing
Detailed
-
Introduction
Melt-blown non-woven fabric is a kind of ultra-fine fiber non-woven material made by melt-blown process, raw material is food grade PP, fiber diameter can be 0.4um-2um. The product is treated with special electrostatic, characteristics of high efficiency and low resistance, comfortable and easy to adorn. Can effectively filtration and adsorption of microorganisms, viruses and extremely dust.
Medical grade mask filter can meet with Europe standard EN14638:2003 requirements, the bacterial filtration efficiency(BFE) is over 95%. Or China Standard YY 0469-2011.
Industry grade mask filter can meet with Europe standard EN149:2001 +a1:2009 FFP1/FFP2/FFP3 requirements, and USA standard NIOSH 42 CFE-84 requirement such as N95/N99, and China Standard GB 2626-2006 requirement as KN95 etc. Particle filtration efficiency(PFE) is over 95%
Specification
| ||||||||||||||||||
 |  |
With the capability to produce fine fibres, ideally suited for the filtration of particles, Melt-blown fabrics provide air filtration applications with excellent barrier and filtration properties.Available in weights ranging from 20 – 80gsm (PP), Melt-blown non-wovens are perfectly suited for applications such as industrial respirators, vacuum cleaner bags, automotive cabin filters, and microbiological filters
Advantages:
- Available in widths up to 160 cm
- Available in various colors
- Melt additives to give enhanced fabric properties, such as UV stability and hydrophobicity
- Electrostatic charging of filaments for enhanced sub-micron particle filtration
- In-line measurement and control of air permeability
- In-line thermal flat calendaring
Applications:
-
Disposal Face Mask Filter
The complexity of technical fabrics as well as their diverse application -
N95,FFP2/FFP3 Mask Filter
High Efficiency of Particle Filtration Fabric -
Industrial Respirators Filter
The complexity of technical fabrics as well as their diverse application -
Automotive Cabin Filters
Clean Air For Better Life.
Melt Blown Fabric for Face Mask Filter Material: (BFE 95)
| BFE95 Melt Blown Face Mask Filter Material is a type of HEPA (high efficiency particulate air) filter. This 100% virgin polypropylene filtration material can be used for PPE (personal protective equipment) masks and respirators. This material has been tested to block 95% of airborne particles with an average particle size range of 3 microns (also known as micrometers). Use this material as the filter layer inside a face mask or face respirator. Please note this material is single use only and non-washable. Based on The American Society for Testing and Materials (ASTM) standard, this mask filtration material is rated at ASTM Level 1 (see documents). A Level 1 rating is for Low Fluid Resistance. When this filter material is used as the inner layer of a face mask made from a recommended mask material, such as Spun Bonded Polypropylene Non-Woven Material for Masks, the effectiveness of the mask increases. |
Testing & Certifications:
| This BFE 95% filtration material has gone through rigorous testing and has passed all required certifications for use as the filter material in masks and respirators for blocking 95% of particles. It has passed the BFE (Bacterial Filteration Efficiency) Test. This test determines the material's filtration efficiency by passing aerosolized particles through the material at a constant flow rate and fixed air pressure. This test method complies with GB19083-2010, EN14638:2003 Please Note: This filter material has only been tested BFE. PFE testing is for particles smaller than those that meet BFE standards. Usually, disposal face mask test on BFE, and N95 mask test on PFE This material has also been tested for breathability and has passed the necessary certification. It was administered and passed the Test, which complies with GB/T32616-2016, EN 14683:2019, Annex C. All test method criteria were met for this material. Testing was performed in compliance with the United States FDA (Food and Drug Administration) good manufacturing practice (GMP) regulations 21 CFR Parts 210, 211 and 820. Test Standard in Different Countries Below:
Comparation of Different Grade of Melt Blown Fabric
|
Factory and Machine:
Colors Available:
-
White
Downloads:
- ASTM Level Guide> Download
- Melt-Blown Filter Test Report> Download
You need a product
![PFE 95% / FFP1 / FFP2 Melt Blown Non-Woven Fabric for Respirator Filter [SGS Certified]](https://icdn.tradew.com/file/201904/1573546/jpg/7372198.jpg?x-oss-process=image/resize,m_pad,l_210/quality,Q_90 "PFE 95% / FFP1 / FFP2 Melt Blown Non-Woven Fabric for Respirator Filter [SGS Certified]")
You May Like
![PFE 95% / FFP1 / FFP2 Melt Blown Non-Woven Fabric for Respirator Filter [SGS Certified]](https://icdn.tradew.com/file/201904/1573546/jpg/7372198.jpg?x-oss-process=image/resize,m_pad,l_100/quality,Q_90 "PFE 95% / FFP1 / FFP2 Melt Blown Non-Woven Fabric for Respirator Filter [SGS Certified]")
- Nearest port for product export
- Qingdao Port, Shanghai Port
- Delivery clauses under the trade mode
- FOB, CFR, CIF, EXW
- Acceptable payment methods
- T/T, L/C, D/P D/A