High quality no wear three phase motor automatic powder coating reciprocator
- US $800.00
1 - 500 piece
- US $3000.00
501 - 1,000 piece
group nameReciprocator for pwoder coating gun
-
Min Order1 piece
brand nameCOLO powder coating equipment
modelCOLO-2000D
payment methodT/T, Western Union, MoneyGram
-
update timeFri, 08 Nov 2024 08:53:06 GMT
Paramtents
Brand Name: colo
stroke 1.8m
Extra Services: Painting / Powder Coating
Automation: automatic
weight: 300kgs
Material / Metal: Aluminum
Voltage: 220V/110V
Power(W): 2.5kw
Certification: CE/ISO
Warranty: 1 YEAR
Packging & Delivery
Min Order1 piece
Briefing
of work-pieces with high standard of technology.
Detailed
Advantages and characteristics:
1.The high-quality import transducer
2.It is driven by non-abrasion three-phase motor and repair is simple.
3.The travel and speed are easy for alteration together with the settings.
4.The machine is applicable for powder spray,paint spray and spray of work-pieces with high
standard.
5.The complete control program of the machine will guarantee accurate orientation.
Technical Data
General information
Maximum available programs | 80 |
Max stoke height | 2.8m |
Maximum speed | 0.8m/s |
Minimum speed | 0.08m/s |
acceleration | 0.1m/s2 |
Electrical data
Nominal input voltage | 170-264VAC single phase |
Tolerance | +10%/-10% |
frequency | 50/60hz |
Fuse | 10.0AT |
Power consumption | 2.5kw |
Dimensions
width | 0.7M |
Depth | 0.7M |
Height(1.5M/2M/2.5M) | 2.4/2.9/3.4M |
weight | 150kgs |
Installation Instructions
1) Wire connecting guiding: 
1. Make sure it is grounded well before using ,the resistor＜100 Ohm.
2. Reciprocator must controlled by the single phase power ,and it can be cut off at any time.
2)Machinery install:
Temperature: -10℃ ～ +50℃
Altitude: ＜1500m
Attack :avoid attack on the control unit
Shaking :do not put the control unit on the shaking place.
electromagnetic interference :do not put the control unit on the place that is around the electromagnetic source.
Air pollution: do not put the control unit on the place that is full with dust or corrosive air ,prevent the dust come into the control unit.
Moisture: do not put the control unit on the moisture place.
Level: the track on the ground need on the standard level ,tight it with expansion bolt.
Display and input buttons
Display | Description |
A1 | Light NO1 |
A2 | Light NO2 |
A3 | Upward moving----see PIC 01 |
A4 | Downward moving---See PIC 02 |
A5 | Auto model |
B1 | Actual value |
B2 | Program mode |
B3 | Manual/auto swich key |
C1 | Top stroke setting |
C2 | Bottom stroke setting |
C3 | Speed setting |
D1 | Manual model switch |
D2 | Power switch OFF |
Note:D1
it is not only for star, and it is key for save program setting
Press B3 
till the A5 is not flash any more(red)—auto working model
Press B3
till the A5 is turn off--- manual working model
When in auto working model, it is controller by power ,in other words when you connect the power , it will work automatic without press any key
When in manual model ,after connected the power , you should press D1 
the host machine
front view
You need a product
You May Like
- Nearest port for product export
- SHANGHAI, NINGBO, QINGDAO, GUANGZHOU
- Delivery clauses under the trade mode
- FOB, CFR, CIF, EXW, FCA
- Acceptable payment methods
- T/T, L/C, MoneyGram, PayPal, Westem Union
- Export mode
- Have the independent export and import right