electrostatic powder coating equipment
group namePowder Coating Gun
-
Min Order1 piece
brand nameCOLO powder coating equipment
modelCOLO-660
payment methodT/T, L/C, MoneyGram, PayPal, Westem Union
-
update timeTue, 05 Nov 2024 14:57:11 GMT
Paramtents
Condition New
Type Coating Spray Gun, powder coating equipment
Substrate Copper
Coating Powder Coating
Voltage 100-240 VAC
Power(W) 50W
Dimension(L*W*H) 56*52*69CM
Weight 35KGS
Certification CE
Warranty 1 YEAR
powder coating machine manual
function surface treatment
technical date pulse
powder hopper 45L stainless steel
Max. input pressure 10 bar / 145 psi
Min. input pressure 6 bar / 87 psi
Max. operating temperature 85°C (+185°F)
Operating frequency 50-60 Hz
Nominal output voltage (to the gun) max. 12 V
Packging & Delivery
Min Order1 piece
Briefing
1.pulse powder coating equipment
2.quick color changes
3.intelligent
4,CE
Detailed
electrostatic powder coating equipment,used for manual powder coating.design for mass powder coating.
COLO-660 Electrostatic Powder Manual Coating Equipment,is designed exclusively for electrostatic coating with powder.
Fully Adjustable Amperage
Pulse Power Technology for beating Faraday Cage Effect.
Able to cut Pulse Power on and off
With three setting program,for flat shape workpiece,complicated shape workpiece,recoating,easy for operation.
Fully Adjustable Air for Pump on Pressure, Dosage and Nozzle Rinsing Air.
Comes with Full Array of Nozzle Assortment.
Field Tested and Proven to operate in the toughest environments.
Comes with different array of delivery systems:
Hope Feed - 45L (samll hopper also could availbale)
Electronics it is specially balanced for the maximum spray capability with
the Smoothest Finish Possible.
Typical characteristics:
1,Control unit has one-touch intelligent operation button good for flat parts, complicated parts and recoat parts.Easy to operate.
2,suitable for the coating of every workpiece. simple, flat workpieces;workpieces with complicated shapes; the over-coating of workpieces which are already coated.
3,Pulse coating system
1). Save powder by 20% compare to Electrostatic Coating ,for the average thickness of our products is 60 μm compare to 70 μm of the latter.
2). Can coat the objects' deepest corner by charging the powder continuously with low current and high voltage.
3). Can reduce orange peel effect significantly compare to common Electrostatic Coating machine .
Configuration:
A control unit power supply cable
- A air filter
- A air pressure regulator
- A fluidized powder hopper
- A plug-in injector
- An manual powder gun with gun cable, powder
hose, rinsing air hose and standard nozzle set.
- Pneumatic hoses for conveying air (red), supplementary
air (black) and fluidizing air (black)
powder hose
Ground wire
TECHNICAL DATA
| Electrical data | |||
| Mains input voltage | 100-240 VAC | ||
| Operating frequency | 50-60 Hz | ||
| Input power | 50W | ||
| Nominal output voltage (to the gun) | max. 12 V | ||
| Nominal output current (to the gun) | max. 1 A | ||
| IP54 | |||
| Ambient temperature range | 0°C - +40°C (+32°F - +104°F) | ||
| Max. operating temperature | 85°C (+185°F) | ||
| Approvals | CE | ||
| Pneumatical data | |||
| Compressed air connection | 1/4" male quick release | ||
| Max. input pressure | 10 bar / 145 psi | ||
| Min. input pressure (while unit in operation) | 6 bar / 87 psi | ||
| Max. water vapor content of the compressed | air 1.3 g/m³ | ||
| Max. oil vapor content of the compressed air | 0.1 mg/m³ | ||
| Packing Dimensions | |||
| Length | 120CM | ||
| Width | 79CM | ||
| Height | 73CM | ||
| Weight | approx. 55kgs | ||
| Connection Description | |||
| 1.1 Air In | Compressed air connection (6-10 bar / 87-145 PSI) | ||
| 2.1 Power | Mains cable connection (100-240 VAC) | ||
| 2.2 Gun | Gun cable connection | ||
| 1.4 |
| ||
| 1.3 | Pict | ||
| 1.2 |
| ||
| Grounding connection | Pict |
Packing Dimensions
Model No. COLO-660
Length: 69cm
Width: 52cm
Height: 56cm
Weight: 37 kgs.
COLO-660 NEW intelligent powder coating equipment
For the convenience of users, can choose the corresponding use mode through intelligent button
Manual coating equipment Function description
the powder gun through the powder hose . The powder is electrostatically
charged at the nozzle of the gun. In addition, an electrostatic field is
created between the gun nozzle and the grounded object. The charged
powder spray remains adhered to the surface of the object.
The powder is fluidized by air forced through a porous plastic plate from
below. The powder acquires, thereby, fluid-like characteristics.
The conveying air, supplementary air, and rinsing air are set on the control
Unit
The process of the coating is like this: The powder is fluidized in the powder hopper. The injectors transport the powder through the hoses to the guns. The guns spray a powder/air mixture onto the workpieces
related equipments
spray booth
For more details for this spray booth ,pls visit http://www.........../product-gs/491056417/Electrostatic_Powder_Coating_booth.html
Curing oven
for more details of this curing oven,pls visit
http://www.........../product-gs/590452605/Electrostatic_powder_coating_oven.html
COLO Powder Coating Systems is a top supplier of powder coating systems and powder coating equipment including manual powder coating equipment, automatic equipment, spray booths,ovens and spare parts for itw gema, wagner, nodrson, kci famous brand in China.
China Powder coating gun, China powder coating machine, China powder coating system, China powder coating equipment, powder coating control unit
We also can supply powder parts replacement of famous powder coating machine , same function,but times lower price!!!
You need a product
You May Like
- Nearest port for product export
- SHANGHAI, NINGBO, QINGDAO, GUANGZHOU
- Delivery clauses under the trade mode
- FOB, CFR, CIF, EXW, FCA
- Acceptable payment methods
- T/T, L/C, MoneyGram, PayPal, Westem Union
- Export mode
- Have the independent export and import right