Box feed vibrating powder spraying machine for fast color change

1. ^{Character: Pulse intelligent type,good for different shape workpiece and deep corner}
2. ^{Box feed unit}
3. ^{Carton size:68x52x84cm G.W:40kg}

 

 

Application of powder spraying machine

The Vibrational manual coating equipment is built exclusively for electrostatic coating with organic powders. 

The electrostatic powder manual coating equipment with the COLO-06 manual powder gun is ideally suited

for manual coating of objects in small series.

Spare parts of COLO-06 manual powder gun

-INSTALLATION

→Propery ground all equipment in the spray area to an earth ground and maintain this ground

→Remove all containers of volatiles from the spray area

→Establish and maintain a grounded area for the spray operator

→The gun of xseries must be connect to xcontrol unit

→OPERATION

→The operator should hold the gun in his bare hand

→If gloves are worm ,the palm should be out to assure skin to metal contact

→The operator should wear shoes with conductive shoes e.g leather

     Rubber shoes are not conductive .

→Ground the tip of the gun before cleaning or changing nozzles.

→When the gun is not in use , it should be hung so that the nozzle is within four inches of a grounded conductor

→The operator should wear a filter-type respiator anytime he is exposed to dusty conditions

→High pressure powder many cause injury ,Keep the rear switch  “off” position in no –use condiction

  MAINTENANCE

→Make a periodic confirmation of grounding to earh of all equipment in the spray area .

→Exercise good housekeeping practices , do not allow dirt or powder to accumulate on the feeder /powder unit , cable or gun.

→Keep the cabinet door