ZW self priming non-clog diesel fuel transfer sewage pump
- US $1,775.00
1 - 40,000 set
- US $90.00
40,001 - 999,999 set
group nameSEWAGE/SLURRY PUMP
-
Min Order1 set
brand nameRONDA
modelZW
payment methodT/T, L/C, D/P D/A, Credit Card, PayPal, Westem Union, Cash, Escrow
-
update timeTue, 05 Nov 2024 15:51:17 GMT
Paramtents
Theory Centrifugal Pump
Structure Centrifugal
Usage Sewage
Power Electric
Standard or Nonstandard Standard
Fuel Diesel Electric
Pressure Low Pressure
Application Sewage
Packging & Delivery
Min Order1 set
Briefing
2.Large sewage capability
3.Open impeller
4.High efficiency
Detailed
ZW self priming non-clog diesel fuel transfer sewage pump
1. Introduction:
1. ZW self priming non-clog diesel fuel transfer sewage pump is special designed for sewage in waste water transfer and treatment.
2. Pump is with self-priming structure, at the bottom of inlet, there’s a hole for unloading of solids left in pump.
3. Pump integrates self-suction and non-clogging and uses axial-back flow outside-mixing type.
4. It is widely applicable for the lines of urban discharge projects, light industry, papermaking, textile, foodstuff, chemicals, electric power, petroleum, mines, aquiculture and so on.
2. Products details:
| Working Principle: | Centrifugal, Self-priming |
| Main applications: | Sewage with slilds |
| Driver: | Electric motor, diesel engine |
| Power Specs: | 380/415 V 3phase; 50hz/60hz |
| Max.permissible fluid temperature: | 80°C(176°F) |
| Type of connection: | Flange |
| Installation position: | Horizontal |
| Casing/Inner parts material: | Cast iron, Stainless steel/Cast iron, Stainless steel |
| Shaft seal type: | Mechanical seal |
| Maximum grain diameter: | 15-170mm |
| Maximum fiber length: | 120-2000mm |
| Maximum viscosity: | 1×104C.S.T |
| Maximum drive rating: | 55KW(75HP) |
| Maximum caliber: | 300mm(12nch) |
| Maximum discharge-side pressure: | 0.8MPa(8bar) |
| Maximum head: | 80m(262.4ft) |
| Flow rate range: | 8-800m3/h(35.2-3520US.GPM) |
3. Performance data:
| Model | Capacity | Power | Head | Speed | Suction | Max grain diameter | Max fiber length | Pressure |
| (m3/h) | (KW) | (m) | (r/min) | (m) | (mm) | (mm) | (MPa) | |
| 25ZW8-15 | 8 | 1.5 | 15 | 2900 | 5.5 | 15 | 120 | 0.1-0.18 |
| 32ZW10-20 | 10 | 2.2 | 20 | 2900 | 5.5 | 20 | 150 | 0.15-0.25 |
| 40ZW20-15 | 20 | 2.2 | 15 | 2900 | 5.5 | 25 | 230 | 0.1-0.18 |
| 40ZW15-30 | 15 | 3 | 30 | 2900 | 5.5 | 25 | 230 | 0.24-0.32 |
| 50ZW10-20 | 10 | 2.2 | 20 | 2900 | 5.5 | 30 | 250 | 0.15-0.25 |
| 50ZW20-15 | 20 | 2.2 | 15 | 2900 | 5.5 | 30 | 250 | 0.1-0.18 |
| 50ZW15-30 | 15 | 3 | 30 | 2900 | 5.5 | 30 | 250 | 0.24-0.32 |
| 65ZW30-18 | 30 | 4 | 18 | 2900 | 5.5 | 40 | 380 | 0.13-0.20 |
| 65ZW20-30 | 20 | 5.5 | 30 | 2900 | 5.5 | 40 | 380 | 0.24-0.32 |
| 65ZW25-40 | 25 | 7.5 | 40 | 2900 | 5.5 | 40 | 380 | 0.32-0.42 |
| 80ZW40-16(2) | 40 | 4 | 16 | 2900 | 5.5 | 50 | 400 | 0.11-0.18 |
| 80ZW40-16(4) | 40 | 4 | 16 | 1450 | 5.5 | 50 | 400 | 0.1-0.18 |
| 80ZW65-25 | 65 | 7.5 | 25 | 2900 | 5.5 | 50 | 400 | 0.18-0.28 |
| 80ZW80-35 | 80 | 15 | 35 | 2900 | 5.5 | 50 | 400 | 0.24-0.37 |
| 80ZW80-45 | 80 | 22 | 45 | 2900 | 5.5 | 50 | 400 | 0.38-0.48 |
| 80ZW50-60 | 50 | 22 | 60 | 2900 | 5.5 | 50 | 400 | 0.55-0.65 |
| 100ZW100-15 | 100 | 7.5 | 15 | 1450 | 5.5 | 60 | 500 | 0.1-0.18 |
| 100ZW80-20 | 80 | 7.5 | 20 | 1450 | 5.5 | 60 | 500 | 0.15-0.25 |
| 100ZW100-20 | 100 | 11 | 20 | 1450 | 5.5 | 60 | 500 | 0.15-0.25 |
| 100ZW100-30 | 100 | 22 | 30 | 2900 | 5.5 | 60 | 500 | 0.24-0.32 |
| 100ZW80-60 | 80 | 37 | 60 | 2900 | 5.5 | 60 | 500 | 0.55-0.65 |
| I00ZW80-80 | 80 | 45 | 80 | 2900 | 5.5 | 60 | 500 | 0.75-0.82 |
| 125ZW120-20 | 120 | 15 | 20 | 1450 | 5.5 | 80 | 750 | 0.13-0.22 |
| 150W200-15 | 200 | 15 | 15 | 1450 | 5.5 | 80 | 750 | 0.1-0.18 |
| 150ZW200-20 | 200 | 22 | 20 | 1450 | 5 | 80 | 750 | 0.15-0.25 |
| 150ZW200-28 | 200 | 30 | 28 | 1450 | 5 | 80 | 750 | 0.23-0.30 |
| 150ZW180-40 | 180 | 55 | 40 | 1450 | 5 | 80 | 750 | 0.32-0.42 |
| 200ZW280-14 | 280 | 22 | 14 | 1450 | 5 | 120 | 1000 | 0.1-0.17 |
| 200ZW300-18 | 300 | 37 | 18 | 1450 | 5 | 120 | 1000 | 0.13-0.20 |
| 200ZW300-25 | 300 | 45 | 25 | 1450 | 5 | 120 | 1000 | 0.18-0.28 |
| 200ZW280-28 | 280 | 55 | 28 | 1450 | 5 | 120 | 1000 | 0.21-0.31 |
| 250ZW400-22 | 400 | 55 | 22 | 1450 | 4.5 | 150 | 1600 | 0.17-0.25 |
| 300ZW800-14 | 800 | 55 | 14 | 1450 | 4.5 | 170 | 2000 | 0.1-0.17 |
4. FAQ:
5. Pictures:
Excellent product made of carefully selected high-quality materials:
Accessories, Components, Auxiliary tools
6. More related products:
»More products
You need a product
Related Searches
You May Like
- Nearest port for product export
- Ningbo, Shanghai
- Delivery clauses under the trade mode
- FOB, CFR, CIF, EXW, FAS, CIP, FCA, CPT, DEQ, DDP, DDU, DAF, DES
- Acceptable payment methods
- T/T, L/C, D/P D/A, Credit Card, PayPal, Westem Union, Cash, Escrow